WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

What Mounting Holes Are Needed on an Integrated Crossed Roller Bearing?

By rockbearing October 29th, 2026 18 views

Introduction: Mounting holes turn an integrated crossed roller bearing into a bolt-on rotary interface, so the hole pattern must be read as part of the machine design rather than as a separate accessory detail.

The mounting-hole set determines whether an integrated crossed roller bearing bolts directly to the machine face or requires interface changes. When the machine face already has a bolt pattern, the bearing drawing must answer three practical questions: which ring carries the threads, which holes are clear for the bolt shank, and where the bolt heads can sit without blocking tool access. On an integrated crossed roller bearing, the end face is the mounting interface, so hole type, hole count, and PCD must match the equipment interface before a custom bearing order is released.

Why the Bearing Face Is Also the Mounting Interface

On a face mount crossed roller bearing such as the XU series, the inner and outer rings are integrated, and the end faces come with pre-machined mounting holes. The face is the surface that seats against the machine structure and transfers bolt clamp load into the ring. In a compact rotary unit, the bearing face, mating machine face, and bolt pattern form one load path. Flat contact, proper bolt seating, and even clamp load matter because the ring can distort if fasteners pull it unevenly. Poor bolt seating or an uneven hole pattern can reduce flat contact before the bearing turns under load.

1. How Threaded Holes and Through Holes Handle Clamp Load

Threaded holes put the thread inside the bearing ring. The bolt passes through the mating part and threads into the ring, so the clamp load is created at the bearing face. Through holes work the other way: the bolt passes through the ring and threads into the machine structure or a nut. Both arrangements work, but they create different stacks, access needs, and assembly sequences. In a threaded-hole joint, the bearing ring needs enough thread depth and wall section to take the bolt load. In a through-hole joint, the ring needs a clear hole and enough face area around it for the bolt head or nut. XU examples include threaded holes such as 6-M8, 12-M6, and 20-M10, and through holes such as 12-φ11, 20-φ14, and 18-φ26. The leading number is the hole count; the M size is the metric thread, and the φ size is the clear hole diameter. M6, M8, and M10 are standard metric thread callouts, but the count and PCD remain model-specific.

2. How Counterbores and PCD Spacing Shape Fastener Seating

A counterbore adds a recessed seat for the bolt head. That recess matters when the bolt head would otherwise sit proud of the ring face or when the socket has to reach into a tight pocket. It keeps the head closer to the ring face, protects the head from interference, and gives the wrench a defined place to work. XU outer-ring examples include counterbores such as 6-φ7-φ11*6.4 and 6-φ9-φ15*8; the notation describes the through-hole diameter, the counterbore diameter, and the counterbore depth. PCD placement completes the interface. PCD1 and PCD2 layouts vary by model, and each bolt circle has to place fasteners where the ring can take clamp load without crowding tool space. The PCD also controls how evenly the ring is pulled toward the machine face. An evenly spaced bolt circle helps the ring seat without localized distortion; a poorly spaced circle can leave one side with less contact even when the bolts are tight. If the PCD is right but the counterbore depth or head clearance is wrong, the bolt may bottom out, sit proud, or block a socket. If the PCD is wrong, the bearing cannot bolt to the machine face.

Match Hole Type and PCD to the Equipment Interface

Start with the machine interface. Measure the existing bolt pattern, note whether the mating part is tapped or clear, check the bolt size and head style, and look at the space around each fastener. Then compare that pattern with the bearing drawing. If the machine has tapped holes, the bearing usually needs through holes or counterbores so the bolt can pass through and thread into the machine. If the machine has clear holes, the bearing may need threaded holes so the bolt pulls the ring against the face. Check whether the bolt load passes through the bearing ring or through the machine frame, because that choice decides where the head and thread should sit. Check which ring is stationary and how clamp load passes through the bolt stack. PCD1 and PCD2 describe separate bolt circles on the two ring faces; match each one to its mating part. The correct match is the one where the bolt stack, head clearance, and ring contact all work on the actual machine face.

Set Hole Count and PCD Before a Custom Bearing Order

Hole count and PCD are machined into the ring end face, so they must be fixed at drawing release. A custom bearing order should state the bolt size, hole type, hole count, PCD, thread depth or counterbore depth, and the access direction for the tool. Hole count affects how evenly clamp load is spread around the ring. Too few fasteners can concentrate load and distort the seat; too many can reduce the available ring section or make tool access awkward. PCD sets the bolt circle and must line up with the equipment interface before production. Rock reviews the interface drawing, checks the requested XU size against the 40–384 mm bore and 112–646 mm outer diameter range, and returns a custom bearing quote for that interface. Sample production is typically 10–30 days, and batch delivery is typically 1–3 months. Final hole count, PCD, bolt size, and torque should come from the approved drawing.

Conclusion

The mounting holes on an integrated crossed roller bearing are small features with a large effect on assembly. Match the hole type to the bolt stack, match the PCD to the machine face, and set the hole count before the drawing is released. A precision roller bearing company that works from your interface drawing can turn those details into a manufacturable ring. If you need a custom bearing, send Rock your machine interface drawing, bolt specification, PCD, bore and outer diameter target, quantity, and sample plan for the XU series. The engineering team can review the mounting-hole layout and prepare a quote. A roller bearing supplier is worth checking the final hole count, PCD, bolt size, and torque on the approved drawing before production.

FAQ

Q: What is the difference between a threaded hole, a through hole, and a counterbore on an integrated crossed roller bearing?

A: A threaded hole is tapped into the bearing ring, so the bolt threads into the ring and clamps the mating part to the bearing face. A through hole is a clear hole; the bolt passes through the ring and threads into the machine structure or a nut. A counterbore adds a recessed seat for the bolt head, which can improve head clearance and tool access. XU examples include 6-M8 threaded holes, 12-φ11 through holes, and 6-φ7-φ11*6.4 outer-ring counterbores.

Q: How do I match the mounting hole PCD to my machine interface?

A: Measure the machine face first: bolt circle, hole count, thread or clearance, bolt head style, and tool access. Then compare those numbers with PCD1 and PCD2 on the bearing drawing. If the machine has tapped holes, use through holes or counterbores on the bearing; if the machine has clear holes, use threaded holes where the bolt can pull the ring into contact. Check rotating-ring clearance before you approve the layout.

Q: Are the metric thread sizes on bearing mounting holes standardized across models?

A: The thread callouts are standard metric sizes, so M6, M8, and M10 follow the metric thread system described by ISO 724. Hole count, PCD, thread depth, counterbore size, and bolt torque vary by model. XU examples use 6-M8, 12-M6, and 20-M10, and PCD1 and PCD2 layouts vary by model, so the approved bearing drawing sets the final bolt specification.

Sources / References

ISO 724 - Metric Threads

Capstone Design, Undergraduate, Mechanical Engineering, Purdue University

Related Examples

Rock XU Series

Previous
How to Choose a Face Mount Crossed Roller Bearing for CNC Rotary Tables
Read More
Next
Precision Crossed Roller Bearings for Compact Semiconductor Rotary Units
Read More