WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

How to Choose a Face Mount Crossed Roller Bearing for CNC Rotary Tables

By rockbearing October 29th, 2026 15 views

Introduction: Face mount crossed roller bearing selection for a CNC rotary table starts at the table face and proceeds through load path, rotation mode, envelope, bolt circle, and model number.

Select a CNC rotary table bearing by starting at the table face and working through load path, rotation mode, envelope, bolt circle, and finally model number. A typical CNC rotary table OEM project starts with a table platter, housing, central bore, bolt pattern, and target height already sketched. The design engineer needs to know whether a face mount crossed roller bearing fits that package without adding a separate flange or bearing housing. The practical sequence is to define how the table carries load and rotates, match bearing bore, outer diameter, and assembled height to the envelope, then confirm PCD and bolt access before releasing the drawing. Following that order avoids a late model change when the bolt circle or table height no longer works.

Start With How the Rotary Table Carries Load and Rotates

On a CNC rotary table, the workpiece sits on the table face, and cutting force acts at the table edge. That creates radial load, axial load in both directions, and a tilting moment at the bearing mounting plane. A crossed roller bearing handles this combination because its cylindrical rollers cross at 90 degrees in a V-shaped raceway. The mounting face therefore becomes the reference for the whole table assembly: the bearing must support the table without letting it lift, rock, or lose indexing stability under load. Rotation mode follows directly from that load path. If the table platter bolts to the inner ring and the outer ring stays fixed in the housing, the bearing runs in inner-ring rotation. If a ring-shaped platter bolts to the outer ring while the inner ring is fixed to the base, the bearing runs in outer-ring rotation. Rock XU Series face mount crossed roller bearings support both modes. This choice changes which ring carries the table, which PCD is used for the table bolts, and which side needs wrench access, so settle it before comparing bore and outer diameter.

Match Bearing Dimensions to the Rotary Table Envelope

Once the load path and rotation mode are clear, the bearing dimensions become a go/no-go check against the table envelope. The goal is not to choose the largest bearing that fits; it is to choose the smallest section that provides the required mounting face, central clearance, housing wall, and bolt access. Use the load path and mounting arrangement as the basis for each dimension check.

1. Bore and Outer Diameter Must Fit the Table Envelope

The bore is the central clearance through the bearing. On a CNC rotary table, it may need to pass a shaft, drawbar, cables, clamping components, or a workpiece fixture. The outer diameter must fit inside the housing and still leave enough wall thickness for mounting bolts and housing stiffness. XU Series covers a bore range of 40–384 mm and an outer diameter range of 112–646 mm. Models such as XU050077 and XU160260 sit at different points in that range, but the table drawing decides which size is viable. A bore that is too small blocks the central function; an outer diameter that is too large forces a larger housing and may push the table outside its target footprint. Treat bore and outer diameter as the first hard boundary, then check height and holes.

2. Assembled Height Affects Stiffness and Housing Space

Assembled height is where the table envelope and bearing stiffness meet. XU Series covers an assembled height range of 15.87–86 mm, a section width range of 13–79 mm, and a weight range of 1.2–115 kg. A taller section gives more room for ring depth and roller support, which can help the table face resist tilting moment, but it also raises the table top and requires a deeper housing pocket. A shorter section saves axial space, yet it leaves less room for bolt length, seat depth, and assembly clearance. Check the actual stack: table platter, bearing, housing seat, and bolt head. If the stack closes with the required thread engagement and no interference, the height is viable. If not, change the bearing height before changing the housing.

Confirm PCD, Mounting Hole Type and Bolt Access

The mounting interface is the last hard gate because a bearing that fits the bore and height can still fail the build if the bolt circle is wrong. XU Series bearings use integrated inner and outer rings with pre-machined end-face mounting holes. The inner-ring hole circle is PCD1 and the outer-ring hole circle is PCD2. Both must match the table platter and housing bolt patterns, including hole count, angular spacing, and thread size. Listed mounting holes include threaded holes, through holes, and counterbored holes on PCD1 and PCD2. Example callouts include 6-M8, 12-M6, and 20-M10 threaded holes, plus through holes such as 12-φ11, 20-φ14, and 18-φ26. Hole type decides how the bolts go in and how they are tightened. A threaded hole lets the bolt thread directly into the bearing ring, so thread depth and engagement matter. A through hole needs a nut or a tapped mating part, and the bolt head must have clear space. A counterbored hole lets the bolt head sit flush or below the mounting face, which is useful when the table platter must sit close to the bearing, but the counterbore depth and socket clearance must be checked. For metric threaded holes, use the standard thread size and pitch rather than a guessed callout; ISO 724 is the reference for metric thread dimensions. The go/no-go test is simple: the PCD and hole pattern match the mating part, the bolts can be inserted and torqued with the available tool, and no bolt head or thread protrudes into the rotating zone.

Conclusion

A CNC rotary table bearing selection starts with the table interface, then moves through rotation mode, bore, outer diameter, assembled height, PCD, hole type, and bolt access. Rock XU Series face mount crossed roller bearings cover a bore range of 40–384 mm, an outer diameter range of 112–646 mm, and an assembled height range of 15.87–86 mm, with inner- or outer-ring rotation and threaded, through, or counterbored holes on PCD1 and PCD2. ZT variants such as XU160260ZT and XU300515ZT are dimension-adjusted versions of XU160260 and XU300515 where the stated data supports that description. For a custom bearing project, send the table interface drawing with bore, outer diameter, assembled height, PCD1 and PCD2, hole type, rotation mode, sample quantity, and target date. As a precision roller bearing company and roller bearing supplier, Rock can review the drawing and return a standard quote in 30–45 minutes, with samples in 10–30 days and production in 1–3 months. Load ratings, limiting speed, material grade, precision class, and sealing are confirmed on the drawing before quotation or sample approval.

FAQ

Q: How do I choose the bore and outer diameter for a face mount crossed roller bearing on a CNC rotary table?

A: Start with the table's central clearance and housing space. The bore must pass the shaft, drawbar, cables, or fixture, while the outer diameter must fit the housing and leave room for bolts and wall stiffness. XU Series covers a bore range of 40–384 mm and an outer diameter range of 112–646 mm, so use the table drawing to select the smallest size that meets both limits, then check assembled height and PCD.

Q: What PCD and mounting hole details should I confirm before ordering a face mount crossed roller bearing?

A: Confirm PCD1 on the inner ring and PCD2 on the outer ring against the table and housing bolt patterns. Check hole count, angular spacing, thread size and pitch, through, threaded, and counterbored holes, bolt head clearance, thread depth, and wrench access. Also confirm which ring rotates so the bolt installation direction matches the assembly. Use standard metric thread data such as ISO 724 for threaded callouts.

Q: Can a face mount crossed roller bearing use either inner ring rotation or outer ring rotation?

A: Yes. Rock XU Series face mount crossed roller bearings support both inner-ring and outer-ring rotation. The choice depends on which ring carries the rotating table and which ring is fixed to the housing or base. Settle that before finalizing PCD access, bolt direction, and housing geometry, because the same bearing size can require different mounting access in each mode.

Sources / References

Lecture Notes | Design and Manufacturing I | Mechanical Engineering | MIT OpenCourseWare

ISO 724 - Metric Threads

Related Examples

Rock XU Series Face Mount Crossed Roller Bearings

Previous
Bearing Manufacturing Process for Chrome Steel 70 Series Bearings
Read More
Next
What Mounting Holes Are Needed on an Integrated Crossed Roller Bearing?
Read More