70 Series Angular Contact Bearing Grade Selector

70 Series Angular Contact Bearing Grade Selector

Your drawing already carries the load case, the speed and the envelope — what it still needs is a grade code. Rock Precision Engineering supplies the 70 series in P2, UP, P4, SP, P5 and P6, and as a bearing manufacturer it publishes the application tiers behind those codes instead of one blanket precision claim. This page walks the same path twice: application first, then grade, then series and lubrication — so that engineers specifying spindles, robot joints or compact gearboxes, and buyers sourcing custom made bearings to a drawing, both land on a quotable starting point before the first RFQ goes out.

Bearings,Rock Precision Engineering Co., Ltd.,Angular Contact Bell Bearings

Decision Path

Three Steps From Application Spec to Grade Code

Work the steps in order. Skipping straight to a part number is what produces a spindle bearing in a gearbox position, or a grade that nobody can verify against the drawing.

1

Application

Write down what the bearing actually does: CNC spindle, robot joint or servo motor, textile spindle, printing or packaging line, turbocharger, air compressor or small gearbox. The application alone narrows the grade band.

2

Grade

Match that application band to P2, UP, P4, SP, P5 or P6, then decide which published code your drawing will carry — and which fields engineering still has to confirm before release.

3

Series & Lubrication

Lock the 70 series envelope, choose factory pre-filled grease or customer-specified oil, and settle the mounting and preload plan before the quote is raised.

Grade Taxonomy

What P2, UP, P4, SP, P5 and P6 Mean in This Range

The 70 series page lists six accuracy grades and calls the grade range its core competitive advantage. This table keeps the codes in their published order and separates what the page confirms from what only an engineering review can settle.

Grade code Availability Application tier on the product page What to confirm before releasing the drawing Note
P2 Listed in the published grade range CNC machine tool spindles; robot joints and servo motors Runout budget, preload, contact angle and bore/OD/width — engineering review required Confirm data-sheet values with the manufacturer before sign-off
UP Listed in the published grade range CNC machine tool spindles; robot joints and servo motors Same fields as above — engineering review required An OEM-specific designation; treat it as supplier-defined
P4 Listed in the published grade range CNC machine tool spindles; robot joints and servo motors Runout, preload and mounting tolerances for the spindle assembly Pair it with the lubrication decision before ordering
SP Listed in the published grade range CNC machine tool spindles; robot joints and servo motors Equivalence and interchange rules — engineering review required OEM-specific; do not assume it matches another brand's SP
P5 Listed in the published grade range Textile machinery spindles; printing and packaging equipment Runout and preload for the spindle or roller assembly The starting band for the textile and print tiers
P6 Listed in the published grade range Automotive turbochargers; air compressors; small gearboxes Fit, lubrication route and mounting torque The starting band for the turbo, compressor and gearbox tiers

Read the codes carefully. SP and UP are OEM-specific designations and are not automatically equivalent to another manufacturer's grades of the same name. Runout figures, tolerance bands, speed ceilings, cost differences and lead-time differences are not published on the current product page — treat every one of those fields as “engineering review required” and confirm them in writing before you substitute or release a drawing.

70 series angular contact ball bearing face view used for precision grade selection

One bearing family, six published grade codes — the selector below decides which code you write down.

Application Matrix

Application → Grade Matrix

Start from the machine, not the catalogue. Where the product page names a grade band for an application, it is quoted here; where it does not, the row is marked for engineering review rather than filled with an assumption.

Application Start with Why this band Series note Next step
CNC machine tool spindles P2 / UP / P4 / SP Spindles are listed against these four codes on the 70 series page Single-row angular contact for combined radial and unidirectional axial load Confirm runout and preload, then request a quote
Robot joints and servo motors P2 / UP / P4 / SP Listed in the same high-precision band as spindles Compact envelope that still carries axial capacity Confirm mounting and preload, then request a quote
Textile machinery spindles P5 Page-listed P5 application Review the lubrication route for continuous running Decide grease or oil, then request a quote
Printing and packaging equipment P5 Page-listed P5 application Review fit and mounting torque for the roller assembly Confirm fit and torque, then request a quote
Automotive turbochargers P6 Page-listed P6 application Confirm the lubrication choice for the assembly Confirm with engineering, then request a quote
Air compressors P6 Page-listed P6 application Confirm the lubrication route and fit Confirm with engineering, then request a quote
Small gearboxes P6 Page-listed P6 application Confirm fit and preload for the gear train Confirm with engineering, then request a quote
Medical devices and optical instruments Not specified on the product page Listed as applications without a named grade band Engineering review required Send the load case for a grade recommendation
Semiconductor equipment and industrial encoders Not specified on the product page Listed as applications without a named grade band Engineering review required Send the load case for a grade recommendation
Aerospace Not specified on the product page Listed under the page's versatile applications Engineering review required Send the load case for a grade recommendation
70 series angular contact bearing used in spindle and robot joint applications

How to read the matrix in a design review

  • Take the row that matches the machine first, then check whether the grade band matches the precision you already quoted to your own customer.
  • If the row says “not specified”, that is a signal to open an engineering conversation, not a signal to guess a grade.
  • Grade alone never closes the loop — series, lubrication and mounting torque are the three fields most often left blank on a released drawing.
  • Confirm cost and delivery differences between grades at quotation, since the product page does not publish a price, MOQ or lead-time table.

Series Fit Check

Does the 70 Series Fit Your Load Case?

Before grade, confirm the bearing family itself. The 70 series is a single-row angular contact ball bearing family built in high-quality chrome steel — the decision here is whether your load case matches what that structure is designed to carry.

Buyer decision

  • Choose the 70 series when the load case is combined radial plus unidirectional axial, and the envelope is tight but still needs axial capacity.
  • Choose it for grading flexibility when one bearing family has to cover several positions at different precision levels — that is what the P2 to P6 range is for.
  • Review another series when your load case does not match a single-row angular contact design. The NU-40 and NU-30 series are published on the same site, and the product range page lists further options.
  • Ask before substituting. Bore, outer diameter, width, load ratings and speed limits are not published in the extracted parameter section of the 70 series page — request them from the manufacturer for your specific size.
Bearings,Rock Precision Engineering Co., Ltd.,Angular Contact Bell Bearings

Single row, calibrated contact angle, chrome steel — the structure behind the load direction in the spec list.

Lubrication

Grease or Oil: the Choice That Changes Commissioning

The 70 series ships with factory pre-filled grease as standard, or with customer-specified oil lubrication. The two options change what arrives in the box and what your assembly has to provide.

Standard

Factory pre-filled grease

The default supply. The factory grease is pre-run-in, so the bearing arrives ready for commissioning without a separate greasing step at your bench.

Best fit when the assembly has no oil circuit and you want fewer variables at first start-up.

Customer specified

Oil lubrication

Available on request. Oil-lubricated bearings ship without grease and contain only a minimal amount of anti-rust oil, so your own oil supply becomes part of the assembly and commissioning plan.

Best fit when the machine already has a defined oil circuit that you control.

70 series bearing prepared for factory grease or customer specified oil lubrication

Two more fields to settle with engineering. Whether you should specify grease or oil for a given speed and operating temperature is not a published value on the 70 series page. State the target speed, temperature and lubrication method in your quote request and let the manufacturer confirm the recommendation in writing.

Mounting & Commissioning

Mounting Practice That Protects the Grade You Specified

A high grade loses its meaning the moment force goes through the rolling elements or the screws are tightened in one pass. The 70 series page sets out a short, repeatable commissioning sequence.






Tools the page calls for

  • Torque wrench — for the three-stage screw sequence.
  • Vernier calipers — for checking the fit against the drawing.
  • Feeler gauges — for clearance checks as your procedure requires.
  • Magnetic base and dial indicator — for runout and alignment checks.

70 series bearing ready for mounting and commissioning checks

Torque sequence, fit checks and the storage run-in belong in the assembly instruction, not in the fitter's memory.

Request a Custom Quote With the Grade Pre-Filled

The 70 series page routes to quotation rather than a shopping cart — “Get a Custom Quote” and “Request Custom Quote” are the two order paths on the site. Customization and bulk supply are offered, so a drawing-specific bearing is a normal request, not a special case.

Send these six fields

  • Application — spindle, robot joint, textile spindle, turbocharger, compressor, gearbox or other.
  • Grade code — the P2, UP, P4, SP, P5 or P6 you intend to release.
  • Dimensions — bore, outer diameter and width, or the full drawing.
  • Contact angle and preload requirement for your assembly.
  • Lubrication — factory pre-filled grease or customer-specified oil.
  • Quantity, delivery destination and any bulk-supply or OEM/ODM requirement.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

P5 and P4 Angular Contact Ball Bearings Differ in Machine Tool Spindles

P5 and P4 angular contact ball bearings are accuracy classes, and real spindle performance also depends on fit, preload, and assembly quality.

Read article

What Is a Single Row Angular Contact Ball Bearing?

A single row angular contact ball bearing uses one row of balls and an angled contact path to carry radial and one-way axial loads together.

Read article

How to Source 70 Series Angular Contact Ball Bearings from China

Sourcing 70 series angular contact ball bearings from China starts before price comparison, because a complete replacement and RFQ package gives a Chinese bearing manufacturer enough technical and…

Read article

Frequently Asked Questions

which precision grades are available for the 70 series?

the 70 series page lists p2, up, p4, sp, p5 and p6, and describes the grade range as the manufacturer's core competitive advantage. availability of a specific grade for a specific bore size should be confirmed at quotation.

which grade should i start with for a cnc machine tool spindle?

the page lists p2, up, p4 and sp against cnc machine tool spindles and against robot joints and servo motors. start inside that band, then confirm runout, preload and contact angle with engineering before you release the drawing.

where do p5 and p6 fit in?

p5 is listed for textile machinery spindles and for printing and packaging equipment. p6 is listed for automotive turbochargers, air compressors and small gearboxes. those tiers are the page's own mapping, not a general ranking of the codes.

are sp and up the same as another brand's sp or up?

no. sp and up are oem-specific designations and are not automatically equivalent to another manufacturer's grades of the same name. confirm equivalence in writing before you substitute a bearing into an existing design.

should i order grease or oil lubrication?

factory pre-filled grease is the standard supply and is pre-run-in. customer-specified oil lubrication is also available, and oil-lubricated bearings ship without grease, containing only a minimal amount of anti-rust oil — so your oil supply becomes part of the assembly plan. speed and temperature limits are not published, so state your operating conditions in the quote request.

can i order made-to-drawing bearings in bulk?

yes. customization and bulk supply are offered, and the site routes orders through quotation rather than a checkout. send the application, grade, dimensions, lubrication choice and quantity, and you will receive a specification and a quote.